62 CHAPTER 2 Licensing
J-Link / J-Trace (UM08001) ©
2004-2017 SEGGER Microcontroller GmbH & Co. KG
2.4.6 Flasher ARM
Flasher ARM is a programming tool for microcontrollers with on-
chip or external Flash memory and ARM core. Flasher ARM is
designed for programming flash targets with the J-Flash soft-
ware or stand-alone. In addition to that Flasher ARM has all of
the J-Link functionality. Flasher ARM connects via USB or via
RS232 interface to a PC running Microsoft Windows 2000 or
later. Flasher ARM has a built-in 20-pin JTAG connector, which is
compatible with the standard 20-pin connector defined by ARM.
Licenses
Comes with built-in licenses for flash download and J-Flash.
2.4.7 Flasher RX
Flasher RX is a programming tool for Renesas RX600 series
microcontrollers with on-chip or external flash memory and
Renesas RX core. Flasher RX is designed for programming flash
targets with the J-Flash software or stand-alone. In addition to
that Flasher RX has all of the J-Link RX functionality. Flasher RX
connects via Ethernet, USB or via RS232 interface to a PC run-
ning Microsoft Windows 2000 or later.
Flasher RX itself has a built-in 20-pin JTAG connector but is
shipped with an 14-pin adapter for Renesas RX devices.
Licenses
Comes with built-in licenses for flash download and J-Flash.
To Next Page
Loading...
