66 CHAPTER 2 Licensing
J-Link / J-Trace (UM08001) ©
2004-2017 SEGGER Microcontroller GmbH & Co. KG
2.5.6 IAR: J-Trace
IAR J-Trace is an OEM version of J-Trace, sold by IAR.
Limitations
IAR J-Trace cannot be used with Keil MDK. This limitation can NOT
be lifted; if you would like to use J-Trace with Keil MDK, you need
to buy a separate J-Trace.
Licenses
No licenses are included. All licenses can be added.
2.5.7 NXP: J-Link Lite LPC Edition
J-Link Lite LPC Edition is an OEM version of J-Link, sold by NXP.
Limitations
J-Link Lite LPC Edition only works with NXP devices. This limita-
tion can NOT be lifted; if you would like to use J-Link with a
device from an other manufacturer, you need to buy a separate
J-Link.
Licenses
No licenses are included.
2.5.8 SEGGER: J-Link Lite ARM
J-Link Lite ARM is a fully functional OEM-version of SEGGER J-
Link. If you are selling evaluation-boards, J-Link Lite ARM is an
inexpensive emulator solution for you. Your customer receives a
widely acknowledged JTAG-emulator which allows to start right
away with development.
Limitations
JTAG speed is limited to 4 MHz
Licenses
No licenses are included. All licenses can be added.
Note
J-Link Lite ARM is only delivered and supported as part of Starter Kits. It is not sold
to end customers and not guaranteed to work with custom hardware.
To Next Page
Loading...
