Segger J-Link - Page 140

140 CHAPTER 3 J-Link software and documentation package
J-Link / J-Trace (UM08001) ©
2004-2017 SEGGER Microcontroller GmbH & Co. KG
-> Show Log Opens or closes the Log Tab. Alt-L
Terminals -> Terminals...
--> Terminal 0 - 15 Opens or closes the Terminal Tab.
Alt-Shift-0
Alt-Shift-F
Input
-> Clear input field
Clears the input field without send-
ing entered data.
Button
’Clear’
Input -> Sending...
--> Send on Input
If selected, entered input will be
sent directly to the target while
typing.
--> Send on Enter
If selected, entered input will be
sent when pressing Enter.
--> Block if FIFO full
If checked, RTT Viewer will retry to
send all input to the target when
the target buffer is full.
Input -> End of line...
--> Windows format (CR+LF)
--> Unix format (LF)
--> Mac format (CR)
--> None
Selects the end of line character to
be sent on Enter.
Input -> Echo input...
--> Echo to "All Terminals"
If checked, sent input will be dis-
played in the All Terminals Tab.
--> Echo to "Terminal 0"
If checked, sent input will be dis-
played in the Terminal Tab 0.
Logging
-> Start Terminal log-
ging...
Starts logging terminal data to a
file.
F5
-> Stop Terminal logging
Stops logging terminal data and
closes the file.
Shift-F5
-> Start Data logging...
Starts logging data of Channel 1 to
a file.
F6
-> Stop Data logging
Stops logging data and closes the
file.
Shift-F6
Help
-> About... Shows version info of RTT Viewer. F12
-> J-Link Manual... Opens the J-Link Manual PDF file. F11
-> RTT Webpage... Opens the RTT webpage. F10
Menu entry Contents Shortcut
Table 3.15: RTT Viewer Menus and Shortcuts