Segger J-Link - Page 3

J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG
3
For further information on topics or routines not yet specified, please contact us.
Revision Date By Explanation
V6.14 Rev. 3 170220 NV
Chapter "Working with J-Link and J-Trace"
* Section "J-Link scriptfiles":
Added: "OnTraceStart()" and
"JLINK_TRACE_Portwidth"
Chapter "Trace"
* Added crossreference to
"JLINK_TRACE_Portwidth"
V6.14 Rev. 2 170216 NV
Chapter "Introduction"
*Added Subsubsection "Software and Hardware
Features Overview" to all device Subsections.
*Edited Subsection ""J-Trace ARM.
*Section "Target interfaces and adapters":
edited "RESET" to "nRESET" and updated
description.
V6.14 Rev. 1 170210 NV
Chapter "Working with J-Link and J-Trace"
* Section "Exec Commands": Updated
SetResetPulseLen
TraceSampleAdjust
Chapter "Trace"
* Section "Tracing via trace pins": Updated
V6.14 Rev. 0 170201 AG
Chapter "Working with J-Link"
* Section "Exec Commands": Updated
SelectTraceSource
SetRAWTRACEPinDelay
ReadIntoTraceCache
Chapter "Trace" added .
V6.10a Rev. 0 160820 EL
Chapter "Working With J-Link"
* Section "Exec Commands": Updated
ExcludeFlashCacheRanges.
V6.00i Rev. 0 160802 EL
Chapter "Introduction"
* Removed "Model Fature Lists"
Chapter "Adding Support for New Devices":
renamed to "Open Flash Loader"
Chapter "Open Flash Loader" updated.
V6.00 Rev. 1 160617 EL
Chapter "J-Flash SPI"
* Added chapter "Custom Command Sequences"
V6.00 Rev. 0 160519 AG Chapter "Adding Support for New Devices" added.
V5.12f Rev. 0 160503 AB
Chapter "Related Software"
* Section "J-Link RTT Viewer" updated and moved
from section "RTT".
V5.12d Rev. 1 160427 AG
Chapter "Working with J-Link and J-Trace"
* Section "J-Link script files" updated.
V5.12d Rev. 0 160425 AG
Chapter "Working with J-Link and J-Trace"
* Section "J-Link script files" updated.
V5.12c Rev. 1 160418 NG
Chapter "Related Software"
* Section "J-Link Commander"
Typo fixed.