J-Link / J-Trace (UM08001) © 2004-2017 SEGGER Microcontroller GmbH & Co. KG
303
File menu elements
Edit menu elements
View menu elements
Command Description
Open data file...
Opens a data file that may be used to flash the target
device. The data file must be an Intel HEX file, a Motorola
S file, or a Binary file (.hex, .mot, .srec, or .bin).
Merge data file
Merges two data files (.hex, .mot, .srec, or .bin). All
gaps will be filled with FF. Find below a short example of
merging two data files named, File0.bin and File1.bin into
File3.bin.
File0.bin --> Addr 0x0200 - 0x02FF
File1.bin --> Addr 0x1000 - 0x13FF
Merge File0.bin & File1.bin
0x0200 - 0x02FF Data of File0.bin
0x0300 - 0x0FFF gap (will be filled with 0xFF if image is
saved as *.bin file)
0x1000 - 0x13FF Data of File1.bin
Can be saved in new data file (File3.bin).
Save data file Saves the data file that currently has focus.
Save data file as...
Saves the data file that currently has focus using the
name and location given.
New Project Creates a new project using the default settings.
Open Project...
Opens a project file. Note that only one project file may
be open at a time. Opening a project will close any other
project currently open.
Save Project Saves a project file.
Save Project as... Saves a project file using the name and location given.
Close Project Closes a project file.
Recent Files > Contains a list of the most recently open data files.
Recent Projects > Contains a list of the most recently open project files.
Exit Exits the application.
Table 11.2: File menu elements
Command Description
Relocate...
Relocates the start of the data file to the supplied hex
offset from the current start location.
Delete range...
Deletes a range of values from the data file, starting and
ending at given addresses. The End address must be
greater than the Start address otherwise nothing will be
done.
Eliminate blank
areas...
Eliminates blank regions within the data file.
Table 11.3: Edit menu elements
Command Description
Log
Opens and/or brings the log window to the active win-
dow.
Project
Opens and/or brings the project window to the active
window.
Table 11.4: View menu elements
To Next Page
Loading...
