MRD 3187B - User Manual
Page 104 (245)
4. Use the and buttons to move
the cursor to the PID to be selected or
deselected, then press the
button.
5. Press the button to edit the
selection.
6. Use the and buttons to
change the selection status.
7. Press the button to save the
selection.
Note: The short name is listed (if available) with the Service. The PIDs video type
and audio language information is shown along with the PID.
Note: The symbol “♦” denotes that the PID is a selected PID (being sent to the
CAM). The symbol “◊” denotes that the PID is not selected (not being sent to
the CAM).
PIDs No Longer in the Input PMT
The selected PIDs that are no listed in the PMT are listed followed with a “*”
under the associated CAM. The list contains the Services, with PID selection
available after selecting the Service. These PIDs can be selected or deselected.
It they remain selected and appear in the PMT, those PIDs will be sent to the
CAM for decryption.
1. Use the and buttons to move
the cursor to a “*”‟ed Service, then
press the button.
2. Use the and buttons to move
the cursor to the PID to be selected or
deselected, then press the
button.
3. Use the and buttons to
change the selection status.
4. Press the button to save the
selection.
5. The display will return to the PID
selection list (Step 3) with the correct
“♦” or “◊”.
Note: When the Service no longer has PIDs that are not in the PMT, it will not be
listed as a “*”’ed Service.
CA Systems RDS1
SVC:1030 CBCMB *
♦x1111 MPEG2 Video
►◊x1114 ATSC AC3
CA Systems RDS1
SVC:1030 CBCMB *
♦x1111 MPEG2 Video
►♦x1114 ATSC AC3
CA Systems RDS1
SVC:816 ABCHE
Svc:892 CBCMH
► SVC:1030 CBCMB *
CA Systems RDS1
SVC:816 ABCHE
♦x1234 MPEG2 video
►◊x1235 ATSC AC3
To Next Page
Loading...
