Sencore MRD 3187B - Page 141

MRD 3187B - User Manual
Page 140 (245)
Destination Port
1. Use the and
buttons to move the cursor to
“Dest Port:” then press the
button.
2. Use the and
buttons to select the column
to edit and use the and
buttons to change the
destination port (1025 –
65536), then press the
button to save the selection.
Source Port
1. Use the and
buttons to move the cursor to
“Source Port:” then press the
button.
2. Use the and
buttons to select the column
to edit and use the and
buttons to change the
destination port (1025 –
65536), then press the
button to save the selection.
Packets Per Frame
1. Use the and
buttons to move the cursor to
“Packets/Ip:” then press the
button.
2. Use the and
buttons to select the column
to edit and use the and
buttons to change the
number of packets per frame
(1 –7), then press the
button to save the selection.
Transmit 1 Setup
Source Port:01030
►Packets/Ip:7
TTL:255
Transmit 1 Setup←→
IP:239.192.0.1
Dest Port:01030
►Source Port:01030
Transmit 1 Setup←→
IP:239.192.0.1
►Dest Port:01030
Source Port:01030