Sencore MRD 3187B - Page 149

MRD 3187B - User Manual
Page 148 (245)
Audio 1 PID
1. Use the and buttons to move
the cursor to “Aud 1 PID:” then press
the button.
2. Use the and buttons to
select the column to edit, then use the
and buttons to select the
desired Audio PID in the stream, then
press the button to save the PID.
Audio 1 Type
1. Use the and buttons to move
the cursor to “Audio1 Typ:” then press
the button.
2. Use the and buttons to
select the audio type (“Dolby AC3”,
“AAC ADTS”, “AAC LOAS”, “Dolby D
+”, “MPEG 1”, “MPEG 2”) on the PID
chosen above, then press the
button.
Audio 2 PID
1. Use the and buttons to move
the cursor to “Aud 2 PID:” then press
the button.
2. Use the and buttons to
select the column to edit, then use the
and buttons to select the
desired Audio PID in the stream, then
press the button to save the PID.
Audio 2 Type
1. Use the and buttons to move
the cursor to “Audio2 Typ:” then press
the button.
2. Use the and buttons to
select the audio type (“Dolby AC3”,
“AAC ADTS”, “AAC LOAS”, “Dolby D
+”, “MPEG 1”, “MPEG 2”) on the PID
chosen above, then press the
button.
Serv Setup ←→
Aud 2 PID:0x0024
►Audio2 Typ:Dolby AC3
DlbyE1 PID:0x0000
Serv Setup ←→
Audio1 Typ:Dolby AC3
►Aud 2 PID:0x0000
Audio2 Typ:---------
Serv Setup ←→
Aud 1 PID:0x0022
►Audio1 Typ:---------
Aud 2 PID:0x0000
Serv Setup ←→
Video Type:MPEG 2
►Aud 1 PID:0x0000
Audio1 Typ:---------