Shimadzu CBM-20A - Page 221

5.12 Parameter Details
5-93
CBM-20A/20Alite
5
5.12.3 Column Oven
Comparison of Parameters for Different Models
The [Valve Position] setting is displayed when [Used] is selected in the [Solenoid Valve]
field in the "Configuration Parameter" window. [CMD] is displayed when a column
module device is connected.
Parameter CTO-30AS CTO-30A
CTO-20A
CTO-20AC
CTO-10Av
CTO-10ACvp
CTO-10ASvp
CTO-10A
CTO-10AC
Method parameters
Oven Temperature

Maximum Temperature

Heat Compensation 
Heat Compensation Flow 
Valve Position

Configuration parameters
Solenoid Valve

CMD
Column ID

Column Name

Column Size

Maximum Injection No.

Total Injection No.

Total Injection Vol.

Usage Time Limit
