Commissioning
5.4 Quick commissioning with a PC.
Converter with the CU240B-2 and CU240E-2 Control Units
152 Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
Proceed as follows to carry out quick commissioning:
When selecting an application class, the inverter assigns the motor co
n-
trol with the appropriate default settings:
[1] Standard Drive Control (Page 154)
[2] Dynamic Drive Control (Page 155)
[0] Expert - or if no application class is listed:
To Next Page
Loading...
