Siemens CU240B-2 - 4 Installing; Overview of the Inverter Installation

Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
53
Installing
4
4.1
Overview of the inverter installation
Installing the inverter
Precondition
Before installation, please check:
● Are the required inverter components available?
– Power Module
– Control Unit
– Accessories, e.g. line reactor or braking resistor
● Do you have the necessary tools and small parts/components required to install the
inverter?
Procedure
To install the inverter, proceed as follows:
1.
Install the accessories (reactors, filter or braking
resistor) for the Power Module:
Installing reactors, filters and braking resistors
(Page 58)
2.
Install the Power Module.
Installing Power Modules (Page 60)
3.
Install the Control Unit.
Installing Control Unit (Page 90)
You have installed all components of the inverter.