Siemens CU240B-2 - Connecting the Line Supply, Motor, and Inverter Components; Permissible Line Supplies

Installing
4.5 Connecting the line supply, motor, and inverter components
Converter with the CU240B-2 and CU240E-2 Control Units
Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
77
4.5
Connecting the line supply, motor, and inverter components
4.5.1
Permissible line supplies
Note
Restrictions for installation altitudes above 2000 m
Above an installation altitude of 2000
m, the permissible line supplies are restricted.
Restrictions for special ambient conditions (Page 475)
Note
Line requirement
The machine manufacturer must ensure that in operation the voltage drop bet
ween the
transformer input terminals and the inverter with rated values is less than 4%.
The inverter is designed for the following power distribution systems according to IEC 60364-
1 (2005).