Siemens CU240B-2 - Go Online and Start Quick Commissioning

Commissioning
5.4 Quick commissioning with a PC.
Converter with the CU240B-2 and CU240E-2 Control Units
150 Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
5.4.3
Go online and start quick commissioning
Procedure with STARTER
Proceed as follows to start the quick commissioning of the inverter:
1.
Select your project and go online: .
2.
In the following screen form, select the inverter with
which you wish to go online.
3.
Download the hardware configuration found
online in
your project (PG or PC).
Significance of the symbol in front of the inverter:
(A) The inverter is online.
(B) The inverter is offline
4.
When you are online, double-click on "Control Unit".
5.
Start the commissioning wizard:
You have started the quick commissioning of the inverter.
Procedure with Startdrive
Proceed as follows to start the quick commissioning of the inverter:
1. Select your project and go online:
2. In the following screen form, select the inverter with which you wish to go online.
3. Once you are online, select "Commissioning" → "Commissioning Wizard":
You have started the quick commissioning of the inverter.