Siemens CU240B-2 - Configuring a Safety Function

Advanced commissioning
6.8 Safe Torque Off (STO) safety function
Converter with the CU240B-2 and CU240E-2 Control Units
332 Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
6.8.3.4
Configuring a safety function
Procedure with Startdrive
Proceed as follows to configure the safety functions:
1. Select "Select safety functionality".
2.
Enable the safety functions:
3.
Select the control type of the safety functions:
4.
Define the interface for controlling the safety functions.
You have configured the safety functions