Siemens CU240B-2 - Page 360

Backing up data and series commissioning
7.1 Backing up and transferring settings using a memory card
Converter with the CU240B-2 and CU240E-2 Control Units
360 Operating Instructions, 01/2016, FW V4.7 SP6, A5E34259001B AC
Procedure with the BOP-2
Proceed as follows to transfer the settings from a memory card to the inverter
1.
If a USB cable is inserted in the inverter, withdraw it.
2.
Go to the menu level “
OPTIONS”.
3.
In the "OPTIONS" menu, select "FROM
CRD".
4.
Set the number of your data backup. You can back up 99 different
settings on the memory card.
5.
St
art data transfer with OK.
6.
Wait until the inverter has transferred the settings from the memory
card.
7.
Switch off the inverter power supply.
8.
Wait until all LEDs on the inverter are dark.
9.
Switch on the inverter power supply again.
You have transferred the settings from the memory card to the inverter.