Siemens SIMATIC PCS 7 OSx - Report Output Directory

Recipes 6-7SIMATIC PCS 7 OSx 4.1.2 Operator
OSx creates the production recipe but does not access the Production Recipe
Preparation display.
To load the recipe, follow these steps.
1. Set the system state to Operate. The system displays the navigation
area on all OSx stations where a user is logged in.
2. Select the
Directory icon from the navigation area. A directory of OSx
display types appears (Figure 6-2, middle).
3. Select the
Recipe option. A list of area tags appears (Figure 6-2,right).
4. Select the area tag that you want to download. The Production Recipe
Preparation display appears (Figure 6-5). Your controller can also make
a download-only request for the area.
The
Clear Selected Recipe pushbuttonontheRecipeSelectionDisplay
(Figure 6-5) allows the operator to cancel the current recipe selection. The
Clear Selected Recipe option deselects the recipe for the recipe area.
Load
Clear Selected
Recipe
Close Help
Figure 6-5 Recipe Selection Display
Clearing the
Selected Recipe