Siemens SIMATIC PCS 7 OSx - Releasing Batch Units

Batch 8-9SIMATIC PCS 7 OSx 4.1.2 Operator
8.6 Releasing Batch Units
To release one or more units from a batch using the batch tag detail, follow
these steps:
1. Select
Release Unit. A list of all units currently assigned to the batch
displays in the navigational area (Figure 8-7). Use the scroll bar to
view multiple pages of units.
2. Select the unit(s) you want to release from the batches, or choose
Select
All & OK
to release all assigned units from the batch.
3. Select
OK to release individually selected units or select Cancel not to
release any units.
Alarm Group:
Alarm State
Sequencing:
Alarming:
State:
Figure 8-7 Releasing Units from a Batch