Siemens SIMATIC PCS 7 OSx User Manual

OSx Station Basics1-28 SIMATIC PCS 7 OSx 4.1.2 Operator
Basic System Functions (continued)
To change the system state, select Controls-->Change System State on the
menu bar (Figure 1-6). Then select the new state from the dialog box.
Change System State
Shutdown OSx and Linux
Shutdown OSx
Offline
Operate
CancelOK
Change System State
Controls
Startup
Logoff
Logon
OSx Terminal
Figure 1-6 OSx Change System State Dialog Box
State changes in a multiple-station system are global — that is, a state
change in one OSx station changes the state for all stations — e xcept under
the following circumstances:
• State changes on a station with the sysadmin role do not affect other
stations, and vice versa.
• State changes on a station set to out_of_service do not affect other
stations, and vice versa.
• When an OSx station transitions to Failed state, typically because an
important process has failed, its state change does not affect other
stations, and vice versa.

Siemens SIMATIC PCS 7 OSx Specifications

General

Brand	Siemens
Model	SIMATIC PCS 7 OSx
Category	Control Systems
Language	English