OSx Station Basics1-40 SIMATIC PCS 7 OSx 4.1.2 Operator
Identifying Screen Areas (continued)
Graphic Display Menu To access the graphic display menu, place the
cursor within any graphic display and click the right mouse button. Graphic
displays include graphics, tag details, the individual faceplates of tag
groups, and trends. You can select from the following menu items:
•
Previous Display allows you to view the graphic display that appeared
before the one that is currently visible.
•
Overview Display allows you to view the initial graphic display that
appears when you set the system to the Operate state.
•
Close Display closes the current graphic display.
•
Zoom In magnifies (zooms) the graphic display to twice its previously
displayed size. The center of the graphic becomes the center of the
zoomed area. Scroll bars appear on the graphic display to enable y ou to
move to areas that are outside the current viewing area.
•
Zoom Out reduces (demagnifies) the graphic display to half its
previously displayed size. The center of the previous display is the
center of the new display.
•
Zoom In --p zooms closer, centered on the point marked by your cursor
when you access the menu. Scroll bars appear on the graphic display to
enable you to move to areas that are outside the current viewing area.
•
Zoom Out --p zooms back, centered on the point marked by your cursor
when you access the menu.
•
Zoom Box allows you to use a box outline to select an area to zoom on
the current display. When you draw the box, the area inside it is scaled
and panned, so that the contents of the box fill the graphic display.
To draw the box, click the left mouse button in the graphic display
where you want the upper left corner of the box to start, move the
cursor down and to the right until the box encompasses the area that
you want to zoom, and click the left mouse button again.
To Next Page
Loading...
Need help?
General
