OSx Station Basics1-52 SIMATIC PCS 7 OSx 4.1.2 Operator
Identifying Screen Areas (continued)
Filtering Directory Lists When you display a list of non-tag entries
from the directory, the default search tool is the incremental data entry
method. The
Filter button at the bottom of the selection list operates
differently from the
Filter... button on the long-list display tool tag selection
list. To use this filter, click the
Filter toggle button so that the Filter option
becomes active. Follow the steps below:
1. Enter the search pattern in the filter search field. This
Filter option is
case sensitive, so be sure upper- and lower-case letters match the entry
you are looking for. Figure 1-22 lists the rules for using the filter.
2. Press
Enter. The cursor jumps to the first occurrence o f the pattern.
3. Select the
Next button to locate the next occurrence of the pattern.
4. When you find the entry that you are looking for, click on the entry to
highlight it, and then click
OK.
Incre
Single
Graphic
Tag Group
To Next Page
Loading...
Need help?
General
