Siemens simovert masterdrives

Parameter
Description Data Read/write
U905*
ObjectDataBeg
2905
Service parameter, only for Siemens service personnel
Parameter for interrogating a connector or binector
interconnection.
The result can be read out in n900.
Index 1 =2 (read connector); =3 (read binector)
Index 2 Connector/binector number (decimal)
Index 3 No meaning
Index 4 No meaning
Index 5 No meaning
Note:
All connector or binector numbers are hexadecimal
values. These have to be converted into decimal values
for interrogation.
index1: 0
Min: 0
Max: 65535
Unit: -
Indices: 5
Type: O2
Menus:
- Parameter menu
- Upread/free access
Changeable in:
- Ready to switch on
- Operation enabled
U910*
SlotDeselect
2910
Compact PLUS only
Parameter for deselecting the optional boards in the slots.
Slot deselection only becomes effective after an electronic
voltage
OFF->ON or after a power-on reset (P972).
Index 1: Basic board
Index 2: Deselection of slot A
Index 3: Deselection of slot B
Index 4: Deselection of slot C
index1: 0
Min: 0
Max: 1
Unit: -
Indices: 4
Type: O2
Menus:
- Parameter menu
- Board configuration
- Upread/free access
Changeable in:
- Board configuration
U910*
SlotDeselect
2910
not Compact PLUS
Parameter for deselecting the option boards in the slots.
Slot deselection only becomes effective after an electronic
voltage
OFF->ON or after a power-on reset (P972).
Index 1: Basic board
Index 2: Deselection of slot A
Index 3: Deselection of slot B
Index 4: Deselection of slot C
Index 5: Deselection of slot D
Index 6: Deselection of slot E
Index 7: Deselection of slot F
Index 8: Deselection of slot G
index1: 0
Min: 0
Max: 1
Unit: -
Indices: 8
Type: O2
Menus:
- Parameter menu
- Board configuration
- Upread/free access
Changeable in:
- Board configuration
n911
Board ID
2911
Compact PLUS only
Visualization parameter for displaying the board ID. This
ID enables various hardware statuses of the installed
electronic boards to be determined.
Index 1: Basic board
Index 2: Optional board on slot A
Index 3: Optional board on slot B
Index 4: Optional board on slot C
Dec.Plc.: 0
Unit: -
Indices: 4
Type: O2
Menus:
- Parameter menu
+ Diagnostics
+ Messages/displays
- Upread/free access
n911
Board ID
2911
not Compact PLUS
Visualization parameter for displaying the board ID. This
ID enables various hardware statuses of the installed
electronic boards to be determined.
Index 1: Basic board
Index 2: Optional board on slot A
Index 3: Optional board on slot B
Index 4: Optional board on slot C
Index 5: Optional board on slot D
Index 6: Optional board on slot E
Index 7: Optional board on slot F
Index 8: Optional board on slot G
Dec.Plc.: 0
Unit: -
Indices: 8
Type: O2
Menus:
- Parameter menu
- Fixed settings
- Quick parameterization
- Board configuration
- Drive setting
- Download
- Upread/free access
- Power section definition
249
Siemens AG 6SE7087-6QX70 (Edition AL)
SIMOVERT MASTERDRIVES Compendium Motion Control