Binector number Binector name Description
B0141 No Ext Fault 2 "NO external fault 2" binector
B0142 Ext Warning "External alarm" binector
B0143 No Ext Warning "NO external alarm" binector
B0144 Ovld Warn Drive "Converter overload alarm" binector
B0145 No OvldWarn Drv "NO converter overload alarm" binector
B0146 Tmp Flt Drive "Converter overtemperature fault active" binector
B0147 No Tmp Flt Drv "NO converter overtemperature fault active" binector
B0148 TmpWarn Drive "Converter overtemperature alarm active" binector
B0149 No TmpWarn Drv "NO converter overtemperature alarm active" binector
B0150 TmpWarnMotor "Motor overtemperature alarm active" binector
B0151 No TmpWarnMotor "NO motor overtemperature alarm active" binector
B0152 TmpFltMotor "Motor overtemperature fault active" binector
B0153 No TmpFltMotor "NO motor overtemperature fault active" binector
B0156 Motor PullOut "Motor pulled out" binector
B0157 No MotorPullOut "Motor NOT pulled out" binector
B0158 ChrgRelay close "Bypass contactor energized" binector
B0159 ChrgRelay open "Bypass contactor NOT energized" binector
B0162 Prechrg active "Precharging active" binector
B0163 Prechrg n.act. "Precharging NOT active" binector
B0170 ... B0185 C->B CONV4 16 binectors of the 4th connector -> binector converter
B0200 No SpdDir Sel No direction of rotation selected
B0201 Accel active Acceleration active
B0202 Decel active Deceleration active
B0203 Limitr FWD act. Speed limitation positive rotation direction reached
B0204 Limitr REV act. Speed limitation negative rotation direction reached
B0205 RelPosContrByps The binector indicates that the ramp-function
generator bypass for the position controller is
available.
B0210 RefPoint sensed Checkback of position sensor: Reference point
detected
B0211 Pos Corrected Status bit of position sensor: Position corrected
B0212 PosMem Valid The binector indicates that a valid value has been
registered by the measured-value memory.
B0215 MaEnAcknRef Position sensing binector external encoder
acknowledgement "Reference point detected"
In function diagram 335.7
B0216 AckPosCorMEncod Position sensing binector external encoder
acknowledgement "Position corrected"
In function diagram 335.7
B0217 AckMVal MEncod Position sensing binector external encoder
acknowledgement "Measured value valid"
In function diagram 335.7
B0220 PosReg release Status bit of position control released
4
Siemens AG 6SE7087-6QX70 (Edition AL)
SIMOVERT MASTERDRIVES Compendium Motion Control
To Next Page
Loading...
