Siemens SINAMICS S200 - Page 618

 00 DI 0 (X132.5) High Low 
 01 DI 1 (X132.5) High Low 
 02 DI 2 (X132.7) High Low 
 03 DI 3 (X132.8) High Low 
 04 DI 4 (X132.9) High Low 
 05 DI 5 (X132.10) High Low 
 06 DI 6 (X132.11) High Low 
 07 DI 7 (X132.12) High Low 
 08 DI 8 (X132.13) High Low 
 09 DI 9 (X132.14) High Low 
Note
DI: Digit
al Input
r0722.2...7 Digital inputs status
S200 Basic PTI Data type: U
nsigned32 V
isible in: S
t
andar
d display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Digital inputs
Unit: -
Description: Display and signal source for the status of the digital inputs.
Bit array: Bit Signal name 1 signal 0 signal 
 02 DI 2 (X132.7) High Low 
 03 DI 3 (X132.8) High Low 
 04 DI 4 (X132.9) High Low 
 05 DI 5 (X132.10) High Low 
 06 DI 6 (X132.11) High Low 
 07 DI 7 (X132.12) High Low 
Dependency: See also: p0488, p0489
Note
DI: Digit
al Input
r0722.0...9 Digital inputs status
S200 PTI Data type: Unsigned32 Visible in: Standar
d display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Digital inputs
Unit: -
Description: Display and signal source for the status of the digital inputs.
Bit array: Bit Signal name 1 signal 0 signal 
 00 DI 0 (X132.5) High Low 
 01 DI 1 (X132.6) High Low 
 02 DI 2 (X132.7) High Low 
 03 DI 3 (X132.8) High Low 
 04 DI 4 (X132.9) High Low 
 05 DI 5 (X132.10) High Low 
 06 DI 6 (X132.11) High Low 
 07 DI 7 (X132.12) High Low 
 08 DI 8 (X132.13) High Low 
Appendix
A.3Parameters
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
616 Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA