Siemens SINAMICS S200 - Page 624

Description: Sets the scaling characteristic for the analog inputs.
The scaling characteris
tic for the analog inputs is de󹪝ned using 2 points.
This parameter speci󹪝es the x coordinate (input voltage in V) of the 1st value pair of the characteristic.
Index: [0] = AI0 (X132.19/20)
[1] = AI1 (X132.21/22)
Note
The parameters f
or the characteristic do not have a limiting e󹪜ect.
p0758[0...1] Analog inputs characteristic value y1
S200 PTI Data type: FloatingPoint32 Visible in: Standar
d display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Can be
changed in the operating
state:
Operation
Par
ameter group: Analog inputs
 Unit: %
 Min:
-1000.00 [%]
Max:
1000.00 [%]
Factory setting:
0.00 [%]
Description: Sets the scaling characteristic for the analog inputs.
The scaling characteris
tic for the analog inputs is de󹪝ned using 2 points.
This parameter speci󹪝es the y coordinate (percentage) of the 1st value pair of the characteristic.
Index: [0] = AI0 (X132.19/20)
[1] = AI1 (X132.21/22)
Note
The parameters f
or the characteristic do not have a limiting e󹪜ect.
p0759[0...1] Analog inputs characteristic value x2
S200 PTI Data type: FloatingP
oint32 V
isible in: S
t
andar
d display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Can be
changed in the operating
state:
Operation
Par
ameter group: Analog inputs
 Unit: -
 Min:
-50.000
Max:
160.000
Factory setting:
10.000
Description: Sets the scaling characteristic for the analog inputs.
The scaling characteristic for the analog inputs is de󹪝ned using 2 points.
This parameter speci󹪝es the x coordinate (input voltage in V) of the 2nd value pair of the characteristic.
Index: [0] = AI0 (X132.19/20)
[1] = AI1 (X132.21/22)
Note
The parameters f
or the characteristic do not have a limiting e󹪜ect.
Appendix
A.3Parameters
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
622 Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA