Siemens SINAMICS S200 - Page 710

c29045 Torque setpoint
S200 PTI Data type: FloatingPoint32 Visible in: Standar
d display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Technology Extensions
Unit: -
Description: AI channel for torque setpoint
c29046 Torque limit
S200 PTI Data type: FloatingPoint32 Visible in: Standar
d display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Technology Extensions
Unit: %
Description: AI channel for torque limitation
c29047 Torque setpoint source
S200 PTI Data type: Unsigned8 Visible in: Standar
d display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Torque setpoints, Technology Extensions
Unit: -
Description: Signal for the torque setpoint.
c29048 Torque limit selection bit 0
 Data type: Unsigned8 Visible in: Standard display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Torque limiting, Technology Extensions
Unit: -
Description: Signal of bit 0 for the torque limit.
c29049 Torque limit selection bit 1
 Data type: U
nsigned8 V
isible in: S
t
andar
d display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Torque limiting, Technology Extensions
Unit: -
Description: Signal of bit 1 for the torque limit.
p29050[0...3] Upper torque limit
 Data type: FloatingPoint32 Visible in: Standard display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Can be
changed in the operating
state:
Ready for oper
ation
Parameter group: Technology Extensions
 Unit: %
Appendix
A.3Parameters
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
708 Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA