Siemens SINAMICS S200 - Page 730

c29301 Clockwise over-travel limit
S200 PTI Data type: Unsigned8 Visible in: Standar
d display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Technology Extensions, Limit
Unit: -
Description: Signal for the active clockwise over-travel limit.
c29302 Counterclockwise over-travel limit
S200 Basic PTI Data type: Unsigned8 Visible in: Standar
d display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Technology Extensions, Limit
Unit: -
Description: Signal for the active counterclockwise over-travel limit.
c29302 Counterclockwise over-travel limit
S200 PTI Data type: Unsigned8 Visible in: Standar
d display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Technology Extensions, Limit
Unit: -
Description: Signal for the active counterclockwise over-travel limit.
c29303 Clockwise rotation
S200 PTI Data type: Unsigned8 Visible in: Standard display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Technology Extensions, Drive enable signals
Unit: -
Description: Signal for clockwise rotation.
c29304 Counterclockwise rotation
S200 PTI Data type: U
nsigned8 V
isible in: S
t
andar
d display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Technology Extensions, Drive enable signals
Unit: -
Description: Signal for counterclockwise rotation.
c29305 Control mode switching
S200 PTI Data type: Unsigned8 Visible in: Standard display 
Read permission: Read drive data or acknowledge messages
Write permission: Edit device con󹪝gur
ation or drive applications
Parame
ter group: Technology Extensions, Quick commissioning
Unit: -
Description: Signal for control mode switching.
Appendix
A.3Parameters
SINAMICS S200 pulse train servo drive system with SIMOTICS S-1FL2
728 Operating Instructions, 11/2023, FW V6.3, A5E51646767B AA