Commissioning Manual
182 6FC5397-4EP10-0BA8, 07/2018
PLC Programming Tool
6.7.1
Overview of PLC Programming Tool
In order to edit the PLC program, use PLC Programming Tool V3.2.4 or higher.
By using PLC Programming Tool, you can perform the following operations:
● Creating the PLC program
● Editing the PLC program
● Making a connection between the programming tool and the system
● Compiling the PLC program
● Downloading the PLC program
● Uploading the PLC program
● Monitoring the PLC
Various instructions are available in PLC Programming Tool. You can view them in the instruction branch of the instruction
tree.
You can select an instruction and press the F1 key to view its help information.
The address of each instruction can be edited at any time by highlighting the instruction.
To Next Page
Loading...
