Siemens SINUMERIK 808D ADVANCED Series

Commissioning Manual
272 6FC5397-4EP10-0BA8, 07/2018
If no error occurs when importing the activation file, the CNC lock function with the new lock date is active in the control
system. You can find the extended lock date being displayed on the HMI screen, for example:
Note
If an error occurs when importing the activation file, an error
-
specific alarm will be issued. The state of the CNC lock function
remains unchanged.
13.10.5
Deactivating the CNC lock function
To deactivate the CNC lock function, the machine manufacturer must use the AMM tool to create a deactivation file
without
lock date
.
Creating the deactivation file
Proceed through the following steps to create the deactivation file:
1.
Start Access MyMachine on your computer.
2.
Selec
t the following menu command:
3.
Click this button in the displayed
dialog box to proceed to the next step.