Commissioning Manual
54 6FC5397-4EP10-0BA8, 07/2018
Mounting the PPU and MCP with the companion clamps
Use the companion clamps (8 for PPU161.3/PPU151.3, 10 for PPU160.3/PPU150.3, 6 for the horizontal MCP, and 8 for the
vertical MCP) to fix the PPU and MCP to the cabinet panel. You can find the mounting positions (circled) on the PPU and
MCP. The distance between two mounting holes of each mounting position is 21 mm.
See the mounting illustration as follows:
The following figures show all mounting positions on the PPU and MCP (unit: mm):
To Next Page
Loading...
