Siemens SINUMERIK 808D ADVANCED Series User Manual

Commissioning Manual
6FC5397-4EP10-0BA8, 07/2018
395
Parameter
MOTION-CONNECT 500 power
cable
MOTION-CONNECT 300 encoder
cable
Shielding Yes (coverage ≥ 80%) Yes
Minimum bending radius, static
5 × outer diameter
Minimum bending radius, dynamic 180 mm, 210 mm, 360 mm,
440 mm
20 × outer diameter
Bending cycles
100000
Oil resistance
DIN VDE 472-803 Part B
EN60811-2-1 fulfilled
Flame-retardant
IEC 332.1
EN60332-1-1 to 1-3 fulfilled
Certification
RoHS and CE
RoHS
15.5
Address of CE-authorized manufacturer
The CE Declaration of Conformity is held on file available to the competent authorities at the following address:
SINUMERIK 808D ADVANCED controller and SINAMICS V70 drive
Siemens AG
Digital Factory
Motion Control
Frauenauracher Straße 80
DE-91056 Erlangen
Germany
SIMOTICS S-1FL6 motor and M-1PH1 main motor
Siemens AG
Digital Factory
Motion Control
Industriestraße 1
DE-97615 Bad Neustadt a. d. Saale
Germany

Siemens SINUMERIK 808D ADVANCED Series Specifications

General

Brand	Siemens
Model	SINUMERIK 808D ADVANCED Series
Category	Control Unit
Language	English