Commissioning Manual
250 6FC5397-4EP10-0BA8, 07/2018
Resets the remaining time for all tasks
After you have created at least one maintenance task on the control system, you can find a task name file (.txt) which
contains the name(s) of all maintenance task(s) created under the current system language. You can access this file through
the following operations:
+ → → → →
A task name file is language-dependent. You can copy the file in the desired language to your computer using a USB
memory stick for backup or batch editing of the maintenance task descriptions.
Using the machine manufacturer's startup screen and machine logo
Using the machine manufacturer startup screen
The control system uses the Siemens startup screen as follows by default. If necessary, you can use your own startup
screen.
To Next Page
Loading...
Need help?
General
