Siemens SINUMERIK 808D ADVANCED Series

Commissioning Manual
448 6FC5397-4EP10-0BA8, 07/2018
Note
You cannot change parameters p1414 and p1656 with the SHIFT
button.
A.1.4.2
Viewing parameters
If a parameter has no index, view its value as follows:
If a parameter has indices, view its value as follows:
A.1.5
Auxiliary functions
Seven BOP functions in total are available:
①
Set Drive Bus address
⑤
Copy parameter set from drive to an SD card
②
Jog
⑥
Copy parameter set from an SD card to drive
③
Save parameter set in drive
⑦
Update firmware
④
Set parameter set to default