To Next Page

To Previous Page

Commissioning Manual

6FC5397-4EP10-0BA8, 07/2018

299

Tag identifier

Meaning

The tag executes the specified operations.

The operations listed in Section "Operators (Page 309)" can be executed.

For the purpose of accessing the NC, PLC, and drive data, the complete variable name

should be placed in

quotation marks

. Section "Addressing components (Page 336) " de-

scribes how addresses are formed.

PLC: "PLC/MB170"

NC: "NC/Channel/…"

Example:

<OP> tmpVar = "plc/mb170" </OP>

<OP> tmpVar = tmpVar *2 </OP>

<OP> "plc/mb170" = tmpVar </OP>

More than one equation can be used within an operation tag. A semicolon marks the end

of the instruction.

Example:

<op>

x = x+1;

y = y+1;

</op>

Character string processing:

The operation instruction is able to process character strings and assign the results to the

string variable specified in the equation.

The identifier _T should be placed at the start as a means of identifying text terms. For-

matting of variable values is also possible. The identifier _F should be placed at the start

of the formatting regulation, followed by the format instruction. The address is then speci-

fied for the variable.

Example:

…

<OP> buffer = _T"unformatted value R0= " +

"nck/Channel/Parameter/R[0]" + _T" and " + _T"$$85051" + _T" for-

matted value R1 " + _F%9.3f"nck/Channel/Parameter/R[1]" </OP>

Siemens SINUMERIK 808D ADVANCED Series User Manual

Questions and Answers: