Siemens SINUMERIK 808D ADVANCED Series

Commissioning Manual
376 6FC5397-4EP10-0BA8, 07/2018
Frame size
FSB
FSC
FSD
Overload capability
Note:
The overload capability is 150% by default. It can be set up to
200% via p0640, but the corresponding overload duration might
be reduced under the circumstances.
Control system
Servo control
Braking resistor
External
Protective functions Earthing fault protection, output short-cut protection, overvolt-
age/undervoltage protection
2)
, I
2
t detection, IGBT overtempera-
ture protection
Cooling method Fan-cooled
Environmental
conditions
Surrounding air
temperature
Operation 0 °C to 45 °C: without power derating
45 °C to 55 °C: with power derating
Storage
-40 °C to +70 °C
Ambient humidi-
ty
Operation
< 90% (non-condensing)
Storage
90% (non-condensing)
Operating environment Indoor (without direct sunlight), free from corrosive gas, combus-
tible gas, oil gas, or dust
Altitude < 1000 m (without derating)
Degree of protection
IP20
Degree of pollution
Class 2