Siemens SIPROTEC 5 User Manual

No. Information Data Class
(Type)
Type
Supv. balan. V
_:2521:82 Supv. balan. V:>Block function SPS I
_:2521:54 Supv. balan. V:Inactive SPS O
_:2521:52 Supv. balan. V:Behavior ENS O
_:2521:53 Supv. balan. V:Health ENS O
_:2521:71 Supv. balan. V:Failure SPS O
Supv. ph.seq.V
_:2581:82 Supv. ph.seq.V:>Block function SPS I
_:2581:54 Supv. ph.seq.V:Inactive SPS O
_:2581:52 Supv. ph.seq.V:Behavior ENS O
_:2581:53 Supv. ph.seq.V:Health ENS O
_:2581:71 Supv. ph.seq.V:Failure SPS O
Supv. sum V
_:2461:82 Supv. sum V:>Block function SPS I
_:2461:54 Supv. sum V:Inactive SPS O
_:2461:52 Supv. sum V:Behavior ENS O
_:2461:53 Supv. sum V:Health ENS O
_:2461:71 Supv. sum V:Failure SPS O
Definite-T 1
_:2641:500 VT miniatureCB:>Open SPS I
Measuring Point V-1ph
No.
Information Data Class
(Type)
Type
VT 1
_:3811:300 VT 1:Sampled val. voltage SAV O
Definite-T 1
_:2641:500 VT miniatureCB:>Open SPS I
Power-System Data
5.9 Information List
SIPROTEC 5, Fault Recorder, Manual 133
C53000-G5040-C018-5, Edition 11.2017

Siemens SIPROTEC 5 Specifications

General

Series	SIPROTEC 5
Communication Protocols	IEC 61850, DNP3, Modbus
Cybersecurity	Role-based access control, secure communication
Modular Design	Yes
Hardware Redundancy	Optional
Operating Temperature	-25°C to +70°C
Digital Inputs	Configurable, number depends on I/O modules
Digital Outputs	Configurable, number depends on I/O modules
Analog Inputs	Configurable, number depends on I/O modules
Current Transformer Inputs	Configurable, number depends on I/O modules
Voltage Transformer Inputs	Configurable, number depends on I/O modules
Time Synchronization	IRIG-B, SNTP, PTP
Protection Functions	Overcurrent, Differential, Distance, Over/Under Voltage, Frequency
Housing	19-inch Rack Mount
Dimensions	Depends on module configuration
Weight	Depends on module configuration
Voltage Input	24V DC, 48V DC, 110V DC, 125V DC, 220V DC, 250V DC