Description of the software
6.4 Description of the menu commands
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
99
6.4 Description of the menu commands
6.4.1 Switching device menu
6.4.1.1 New
To create a new project, choose "Switching device" > "New".
You can display all the switching devices that you can process using the SIRIUS engineering
products that you have installed and then select one for processing.
The system displays a list containing the short codes for the available switching devices. You
can choose one of these entries. A short description is displayed underneath. If you install
SIRIUS engineering for other switching devices, the new switching devices are added to the
hardware catalog.
Selection
To choose the switching device, select it and then click "OK" or simply double-click the
required device name.
To open or close the sub-directories of the switching device tree displayed, click [+] or [-].
6.4.1.2 Open...
To open parameter files that were generated with MSS ES and that have the file extension
*.sdp (switching device parameters), choose "Switching device" > "Open". When a file is
selected, the directory that was last used is always displayed. From here, you can navigate
to the required file.
6.4.1.3 Import...
Importing parameters
You can overwrite the currently displayed diagram with the values from a file by selecting the
menu command "Switching device" > "Import...." The current focus of the program does not
change (i.e. if you make changes, for example, these are not saved in the device from which
the data was imported).
To Next Page
Loading...
