Description of the hardware
5.2 Mounting/installing/attaching
Modular Safety System 3RK3
68 System Manual, 10/2008, 926 2530-02 DS 02
5.2.5 Removing the diagnostics module
Removing the diagnostics module from a control cabinet door/control panel
Step Operating instruction Figure
1 Take appropriate measures to ensure
the diagnostics module does not fall
out of the control cabinet door/control
panel.
2 Unscrew the screws of the four fixing
brackets on the rear
2 Remove the fixing brackets.
3 Pull the diagnostics module out of the
mounting cut-out from the front.
[
To Next Page
Loading...
