Siemens SIRIUS 3RK3 - Status Functions; Device Status

Description of the software
6.7 Functions
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
179
6.7.4 Status functions
6.7.4.1 Device status
Description
The function "Device status" provides status information about the MSS safety relay. When
the status activated in the parameter "Status type" exists, the function output Q is set to "1".
With the function "Device status", defined responses can be implemented in the downstream
logic by connecting the function output Q in the logic diagram.
Parameters
Parameter name Description/parameter value
Name You can enter a name for the element here.
Element number Consecutive number which is automatically assigned. You can
change the number.
Element activated When this parameter is active, the function is processed in the
safety logic.
When the parameter is deactivated, the set substitute value is
made available at the output Q.
General
Function output substitute
value
"0" or "1" can be assigned to the substitute value when the
element is deactivated.
Substitute value "0" means output Q = 0
substitute value "1" means output Q = 1
Parameter Status type Select the status message to be displayed at the function output
Q. Your options are:
• No status information
• Group error
• Logic error
• Test mode active
• Safety mode active