Siemens SIRIUS 3RK3 - Control Functions; Device Command

Description of the software
6.7 Functions
Modular Safety System 3RK3
180 System Manual, 10/2008, 926 2530-02 DS 02
6.7.5 Control functions
6.7.5.1 Device command
Description
With the function "Device command", commands can be integrated in the safety relay and
connected device-specific.
When there is a positive edge "0 → 1" at the input IN, the command is executed.
Parameters
Parameter name Description/parameter value
Name You can enter a name for the element here.
Element number Consecutive number which is automatically assigned. You can change
the number.
General
Element activated When this parameter is active, the function is processed in the safety
logic.
When the parameter is deactivated, the set substitute value is made
available at the output Q.
Parameter Command type
• Execute no command
• Reset