Description of the hardware
5.3 Connecting/wiring
Modular Safety System 3RK3
80 System Manual, 10/2008, 926 2530-02 DS 02
5.3.9 Disconnecting
WARNING
Hazardous Voltage.
Can Cause Death, Serious Injury, or Property Damage.
Before starting work, therefore, disconnect the system and devices from the power supply.
Disconnecting PROFIBUS DP connection (if applicable)
Step Operating instruction Figure
1 Loosen the screws of the PROFIBUS DP
connector.
2 Remove the PROFIBUS DP connector.
Disconnecting system interfaces
Step Operating instruction Figure
1 Press the locking element apart and
simultaneously pull the connection cable out of
the connector slot of the system interface.
To Next Page
Loading...
