Siemens SIRIUS 3RK3 - Grids and Lines

Description of the software
6.6 Logic diagram
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
155
6.6.4.16 Grids and lines
Screen grid button
In the dialog "Screen grid", you can manually optimize the graphical representation.
You can also call up this dialog with the menu command "Options" > "Settings of Modular
Safety System ES" under the tab "Logic" by clicking on the "Screen grid" button.
Call:
Button Command
"Change grid settings"
"Screen grid" dialog window
Align objects Grid settings
Align objects with grid The distance between the individual grid points can be
set from 5 to 50 mm in 5 mm increments.
Align objects with other objects You can choose whether every first, second, third,
fourth, fifth, or sixth grid point is to be shown.
Both options together Activate the option "Display grid on the screen" to
display a screen grid.
Basic settings
The settings above are preassigned:
• Distance: 30 mm
• Show every first grid point, display grid on the
screen