Operator control
7.4 Operation with MSS ES
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
223
"Comparison of configurations" dialog box
The "Comparison of configurations" dialog box contains any deviating results from the
comparison in tabular form:
● "Parameter name" column: Contains the names of the parameters with deviations, these
are displayed in a tree structure:
Configuration > Data structure > Element > Individual parameter
● "Source configuration" column: Contains the parameter value belonging to the parameter
name in the open configuration.
● "Comparison configuration" column: Contains the parameter value belonging to the
parameter name in the comparison configuration.
"Go to" button
If you click on the "Go to" button in the "Comparison of configurations" dialog box, the
respective view opens in the work space in which the object belonging to the selected
parameter can be edited.
The prerequisite is that an element be selected in the tree structure in the table of
differences.
Example: A function is selected in the "Comparison of configurations" dialog box. "Go to"
leads to the corresponding function in the logic diagram.
"Print" button:
Using the "Print" button in the "Comparison of configurations" dialog box, open a print
preview of the results of the comparison. Define whether you want to print out the results of
the comparison or to save them in PDF format.
7.4.2 Cross references
The "Options" > "Cross references" menu command shows the cross references in tabular
form in the output window.
Structure of the cross reference list
Operand Kind Type Usage
location
Diagram Page
Module
Channel
Terminal identifier
Device status function
Access:
WR = write
RO = read
Type of
operand
Element type
and element
number of the
function.
Name of the
diagram in which
the function is
located.
Page on which the function
block that is connected to
the function is located.
Note
The cross reference list only displays the operands used in the safety circuit.
To Next Page
Loading...
