Siemens SIRIUS 3RK3 - Display Settings

Diagnostics / service
8.3 Diagnostics with diagnostics module
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
253
Slot 3 (central unit)
The following information on the DP interface is available:
● Equipment identifier (BMK)
● Order No. (MLFB)
● DP address
● Short designation
● HW revision level
● FW revision level
● Time stamp
Slot 4 ... y
The following information on the expansion modules is available:
● Equipment identifier (BMK)
● Order No. (MLFB)
● HW revision level
8.3.4.4 Display settings
All settings affecting the diagnostics module can be made via the display settings. In this
menu, you will also find information on the diagnostics module itself. The display settings can
be reset to the default setting in the "Factory settings" menu option.
You can access the individual submenus by pressing the right key (OK).
With the left key, the display moves back one menu level.
Identification
The following information for identifying the diagnostics module is contained here:
● Order No. (MLFB)
● Hardware version (HW revision level)
● Software / firmware version (FW revision level)
Languages
The following languages can be selected:
● English (default setting)
● German
● French
● Spanish