Siemens SIRIUS 3RK3 - Displays

Diagnostics / service
8.3 Diagnostics with diagnostics module
Modular Safety System 3RK3
244 System Manual, 10/2008, 926 2530-02 DS 02
"Park position" for cover
The cover can be "parked" on the front of the diagnostics module under the system interface.
8.3.2 Displays
On the display, you can read current operating and diagnostics data as well as status
information of the MSS in plaintext.
SIRIUS 3RK3
DEVICE
BF
SF
XXXX



Display ①
Here, the messages and status information of the MSS are shown in plaintext. Short values
(e.g. plant identifiers) are shown directly under the heading, long texts (e.g. the comment)
are shown in a submenu. It can be seen on the (OK) key that a submenu can be launched.
Scrollbar ②
As shown in the diagram, this bar indicates whether additional menu entries or messages
are present. These entries can be selected and displayed with the arrow keys.
If no other entries are present, the inside of the bar is black.
Function of the softkeys ③
Displays the current function of the two softkeys.
Possible displays:
Key left (meaning) Key right (meaning)
⇑ (moves you one menu level higher) OK (selects / confirms)
Test / reset (acknowledges error)