Siemens SIRIUS 3RK3 - Installing the Automation License Manager

Description of the software
6.2 Installation and program start
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
93
6.2.1.2 Installing the Automation License Manager
Installing Automation License Manager
Automation License Manager is installed by a setup program. You will find the installation
software for the Automation License Manager on the MSS ES product CD.
You can install the Automation License Manager together with MSS ES or at a later point in
time.
Note
• For detailed information on the setup procedure for the Automation License Manager,
read the latest readme file (Readme.rtf).
• The online help for the Automation License Manager contains all the information you
need about using license keys and the functions they offer.
Installing license keys at a later date
When you start the MSS ES software without installed license keys, the system displays a
corresponding message.
You can install license keys later in the following ways:
● Install license keys from a USB stick
● Install license keys downloaded from the Internet (license keys must be ordered first)
● Using floating license keys available on the network.
Refer to the online help for the Automation License Manager for detailed information on
installing license keys. To access this context-sensitive help function, press F1 or select the
menu command "Help" > "Help on Automation License Manager".
Note
• License keys will only be operational if they are installed on a hard disk on which write
access is allowed.
• Floating licenses can also be used within a network ("remote" use).