Siemens SIRIUS 3RK3 - Output Cell

Description of the software
6.7 Functions
Modular Safety System 3RK3
164 System Manual, 10/2008, 926 2530-02 DS 02
6.7.2.2 Output cell
Description
The output cell forwards the signal states from the safety logic to an output. The signal states
can be output, for example, at the terminal of an output module or also through a bus
system.
Parameters
Parameter name Description/parameter value
Element number Consecutive number which is automatically assigned. You can
change the number.
Element activated When this parameter is active, the function is processed in the
safety logic.
When this parameter is deactivated, the set substitute value is
made available at the output Q.
General
Function output substitute
value
"0" or "1" can be assigned to the substitute value when the
element is deactivated.
Substitute value "0" means output Q = 0
substitute value "1" means output Q = 1
Parameter Terminal - Output Select the output to be processed by the function.