Description of the software
6.6 Logic diagram
Modular Safety System 3RK3
136 System Manual, 10/2008, 926 2530-02 DS 02
Short code of parameter Short designation of the parameter.
Parameter value
1. Current value of the parameter.
2. The parameter value can be changed in the corresponding parameter dialog (double-click
on function).
Input Connection point for a connection
Output Connection point for one or several connections.
Short code for input or
socket
Short designation of the input or the outputs.
Page margin On the screen, the print layout is represented by corresponding page margins. To permit the
graphic network to be read across several pages, corresponding designations are printed for
connections at the page margins. They indicate the name of the function and connected
terminal, as well as page coordinates, element number and, if applicable, the diagram name.
The page margins are always shown and cannot be hidden.
The labeling of the connections can be shown and hidden by means of the menu command
"Options" -> "Settings of Modular Safety System ES..." > "Logic"and the option "Label page
transitions of connections also on screen".
Interrupt connections with
reference
See description of the menu command "Interrupt connection".
6.6.2 Features of the logic diagram
Features of the logic diagram
The logic diagram has the following features:
● Graphic connection of the functions used and representation in the form of a function
diagram:
– Representation of the switching elements as functions with input connections and
output connections
– Representation of physical and logic addresses in the form of address elements
– Representation of interconnections as connecting lines between functions
– Display of relevant function parameters
● Documentation management:
– The pages are divided automatically.
– The individual pages are displayed on the screen as they are printed.
To Next Page
Loading...
