Siemens SIRIUS 3RK3 - Zoom out; Zoom Dialog; Overall View; Highlight Signal Flow

Description of the software
6.4 Description of the menu commands
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
119
6.4.4.2 Zoom out
The "View" > "Zoom out" command reduces the current view by one zoom level.
This menu command can only be selected if the logic diagram is active.
6.4.4.3 Zoom dialog
The "View" > "Zoom dialog" menu command opens the zoom dialog box of the logic
diagram. A zoom level can be selected there.
This menu command can only be selected if the logic diagram is active.
6.4.4.4 Overall view
Using the "View" > "Overall view" menu command, you can set the zoom level in such a way
that the entire diagram is visible on the screen.
This menu command can only be selected if the logic diagram is active.
6.4.4.5 Highlight signal flow
The "View" > "Highlight signal flow" menu command visually highlights all of the elements
located in the signal flow to the left (input side) and right (output side) of the selected
element.
This menu command can only be selected if the logic diagram is active.
6.4.4.6 Delete highlighting
The "View" > "Delete highlighting" menu command deletes all markings that resulted from
the "Highlight signal flow" menu command.
6.4.4.7 Navigation Window
The "View" > "Navigation window" menu command shows/hides the navigation window.
6.4.4.8 Output window
The "View" > "Output window" menu command shows/hides the output window.
6.4.4.9 Catalog window
The "View" > "Catalog window" menu command shows/hides the catalog window.
6.4.4.10 Minimize / restore online dialogs
Use the "View" > "Minimize/restore online dialogs" command (or the corresponding icon in
the toolbar) to collectively minimize or restore the display of all open online dialogs.