Description of the software
6.4 Description of the menu commands
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
109
6.4.2.16 Object properties...
Using the "Edit" > "Object properties" menu command, you can call up the parameter
assignment dialogs for the circuit elements of the safety circuit or for the modules.
6.4.2.17 Check consistency
The "Edit" > "Check consistency" menu command checks the configuration according to the
rules for consistency checking.
Note
A consistency check is carried out every time the configuration is saved.
The errors found during this check appear in the output window "Consistency check results"
under the configuration table work space.
6.4.2.18 Password for project access...
Using the "Edit" > "Password for project access" menu command, you can carry out the
following actions:
● Enter the project access password for the first time
● Change the project access password by entering the old password and then entering the
new password twice
● Reset the password protection for the project by entering the old password and then
entering a blank password twice
● Use the "Forgot password" button to create an activation code for when you forget the
project access password.
Password prompt
This password prompt appears in the "Enter password" dialog box when you open an offline
configuration.
6.4.2.19 Forgot password
If you have forgotten or lost your project access password, you can request a file from the
Siemens hotline for activating the password using the "Edit" > "Password for project
access..." menu command via the "Forgot password..." button.
Activate password
If lost, activate the password as follows:
1. Under the "Password for project access" menu command, click on the "Forgot
password..." button.
2. In the "Forgot password" dialog box enter:
• your name
To Next Page
Loading...
