Description of the software
6.5 Identification and configuration
Modular Safety System 3RK3
System Manual, 10/2008, 926 2530-02 DS 02
127
Information Meaning
Description You can enter additional information here. Max length: 54 characters
Author You can enter the name of the author of the entries here.
Comment Here you can store additional information in the system or in the safety
relay.
Max. length for the Author and Comment input fields, taken together: 187
characters.
Note
This view cannot be edited in the online view.
6.5.1.3 Project
"Project" view
In the view "Identification" > "Project", you can edit the following descriptions:
● Project name
● Name of configuration engineer
● Configuration engineer's company name
Information Meaning
Project name Enter at least one character
Name of configuration engineer Enter at least one character
Configuration engineer's
company name
Enter at least one character
Configuration CRC Cyclic Redundancy Check which saves all safety-relevant
configuration data (4 bytes).
The transfer of safety-relevant configuration data through insecure
communication channels must be secured for the MSS ES safety
relay.
Configuration time stamp The MSS ES enters the current time stamp when a configuration
is saved.
Configuration released Release status of the configuration. Details can be determined via
"Options" > "Release information".
Number of slot modules Number of slot modules in the device configuration.
Number of function elements Number of function elements in the device parameter assignment.
6.5.1.4 Messages during the consistency check - Identification
The consistency check is used to check whether the configuration is correct and complete.
A consistency check is carried out for the following actions:
To Next Page
Loading...
